Support Forum

Informations about tension springs, used for the Cromwell suspensions.

In the assembly guide (version 1.0.6_EN) , the diameter of the spring is 7.5-8 mm.
Over time, i found that the 7mm outer diameter is ideal.

Springs with the 8mm diameter can touch the side panels, they can be scratched, they can make sounds and they can be even jammed, i think.
Outer diameter of 7mm is not very typical (6 or 8mm is regular size), but still available.

Tension spring:
wire diameter: 0,8mm
outer diameter: 7mm
lenght: 30-32mm

https://www.aliexpress.com/item/1005005393095099.html

Personally, i use this springs from the local source.They are a little bit longer (32mm) but its ok.

http://www.webareal.cz/webareal-cz/esho ... -1x32x24-5


If you have good experience with some another type of the springs, let us know, please.

Any updates on the springs?

New better sources??

Later 42rocker

Hi.Sorry for the late reply.
Unfortunately, i dont have searched for any other sources.
But i can check.
Where are you from?What is the "better" source for you?

Better source, well the first three links don't link in to a product.
The last link does and I believe in Czech, so I'm thinking lots on the s&h.

Anyone in the USA or China or ??

Thanks for any help.

Later 42rocker

You're right.I didn't notice that the link doesn't work anymore.
I've edited it.
I may add more alternatives in time.