Applies to all 1/6 scale periscopes from Warprints.
You will need:
1. Aluminium tape
https://www.amazon.com/Aluminum-Foil-Ta ... +Foil+Tape
- IMG_20230805_150841.jpg (55.9 KiB) Viewed 8008 times
2. A sheet of translucent plastic.
Thicker is better.
You can use any flat plastic wrap.
For example, even a plastic bottle if it is squared.
- IMG_20230805_140654.jpg (573.29 KiB) Viewed 8008 times
3. Periscopes
- IMG_20230805_140958.jpg (209.11 KiB) Viewed 8008 times
Instructions:
1. Prepare precisely cut squares of both aluminium foil and translucent plastic.
This is the hardest part.
- IMG_20230805_133523.jpg (216.54 KiB) Viewed 8008 times
2. Stick the aluminium foil inside.
It's easy.The tape is self-adhesive.
Use something soft, like ear cleaning sticks, to press the tape down.
- IMG_20230805_141711.jpg (286.51 KiB) Viewed 8008 times
3. Glue translucent plastic - an imitation of periscope glass.
If you are using a second glue, use only a very small drop.
Almost any glue will be visible if it leaks where it is not supposed to be.
Done.
- IMG_20230805_150316.jpg (229.31 KiB) Viewed 8008 times
- IMG_20230805_150344.jpg (188.62 KiB) Viewed 8008 times
- IMG_20230805_150404.jpg (176.01 KiB) Viewed 8008 times